Our classic for extreme parallel offset: The Schmidt-Kupplung® compensates variable parallel shaft offset without side loads in a very compact envelope. The Schmidt-Kupplung® is the ideal precision component for small envelopes and a better alternative to long cardan shafts.
A symbiosis of performance, compact design and generous misalignment capacity.
Symbiosis of performance, compact design and generous offset capacity Bore diameter up to 80 mm Torque (TKN) 44 Nm to 2.875 Nm
More torque transmission while retaining compact design Bore diameter up to 95 mm Torque (TKN) 44 Nm to 6.610 Nm
Extreme parallel shaft offset while retaining compact design Bore diameter up to 80 mm Torque (TKN) 44 Nm to 3.830 Nm
Hub version 3: locking-assembly | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | X (mm) | W (mm) | K (mm) | ∅P (mm) | standard bore diameters (mm) | |
S 35 | 35 | 65 | 3.100 | 45 | 6 | 23 | 1 | 0,8 | 7 | 2,1 | 0,7 | 52 | 74 | 9 | 44 | 15 | 41 | 15, 16 |
S 40 | 45 | 85 | 1.900 | 95 | 13 | 50 | 1 | 0,8 | 10 | 4,1 | 1 | 62 | 74 | 9 | 44 | 15 | 47 | 19, 20 |
S 45 | 45 | 85 | 2.800 | 45 | 6 | 23 | 1 | 0,8 | 10 | 4 | 0,9 | 62 | 74 | 9 | 44 | 15 | 47 | 19, 20 |
S 115 | 110 | 210 | 3.500 | 64 | 9 | 34 | 1 | 0,8 | 24 | 13 | 2,2 | 74 | 108 | 14 | 74 | 17 | 60 | 16, 18, 20 |
S 150 | 150 | 290 | 2.200 | 126 | 17 | 66 | 1 | 0,8 | 33 | 29,1 | 2,9 | 94 | 116 | 15 | 74 | 21 | 76 | 25, 28, 30 |
S 155 | 150 | 290 | 3.100 | 64 | 9 | 34 | 1 | 0,8 | 33 | 34,8 | 3,3 | 94 | 116 | 15 | 74 | 21 | 76 | 25, 28, 30 |
S 210 | 210 | 410 | 1.900 | 126 | 17 | 66 | 1 | 0,8 | 47 | 105,5 | 5,9 | 124 | 124 | 17 | 74 | 25 | 96 | 30, 32, 35, 40 |
S 215 | 210 | 410 | 2.700 | 64 | 9 | 34 | 1 | 0,8 | 47 | 102,6 | 5,8 | 124 | 124 | 17 | 74 | 25 | 96 | 30, 32, 35, 40 |
S 285 | 280 | 550 | 2.500 | 100 | 14 | 53 | 1 | 0,5 | 63 | 84 | 6,2 | 100 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
S 360 | 360 | 710 | 1.800 | 162 | 22 | 85 | 1 | 0,5 | 81 | 141 | 7,7 | 120 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
S 365 | 360 | 710 | 2.300 | 100 | 14 | 53 | 1 | 0,5 | 81 | 135 | 7,4 | 120 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
S 440 | 440 | 865 | 1.700 | 162 | 22 | 85 | 1 | 0,5 | 99 | 225 | 9,4 | 140 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
S 445 | 440 | 0.865 | 2.100 | 100 | 14 | 53 | 1 | 0,5 | 99 | 216 | 9,1 | 140 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
S 630 | 630 | 1.240 | 1.500 | 162 | 22 | 85 | 1 | 0,5 | 142 | 370 | 14,5 | 143 | 194 | 23 | 134 | 30 | 112 | 45, 50 |
S 635 | 630 | 1.240 | 1.700 | 122 | 17 | 64 | 1 | 0,5 | 142 | 365 | 14,5 | 143 | 194 | 23 | 134 | 30 | 112 | 45, 50 |
S 760 | 760 | 1.485 | 1.400 | 162 | 22 | 85 | 1 | 0,5 | 170 | 495 | 16 | 163 | 184 | 17 | 134 | 25 | 96 | 30, 32, 35, 40 |
S 765 | 760 | 1.485 | 1.600 | 122 | 17 | 64 | 1 | 0,5 | 170 | 535 | 17 | 163 | 184 | 17 | 134 | 25 | 96 | 30, 32, 35, 40 |
S 950 | 950 | 1.820 | 1.300 | 162 | 22 | 85 | 1 | 0,5 | 209 | 1.020 | 22,5 | 190 | 202 | 24 | 134 | 34 | 120 | 50, 55, 60 |
S 955 | 950 | 1.820 | 1.500 | 122 | 17 | 64 | 1 | 0,5 | 209 | 1.010 | 22,5 | 190 | 202 | 24 | 134 | 34 | 120 | 50, 55, 60 |
S 1130 | 1.130 | 2.200 | 1.200 | 180 | 25 | 95 | 1 | 0,5 | 252 | 620 | 19,5 | 164 | 209 | 20 | 155 | 30 | 115 | 30, 35, 40 |
S 1135 | 1.130 | 2.200 | 1.500 | 129 | 18 | 68 | 1 | 0,5 | 252 | 590 | 19 | 164 | 209 | 20 | 155 | 30 | 115 | 30, 35, 40 |
S 1320 | 1.320 | 2.580 | 1.200 | 180 | 25 | 95 | 1 | 0,5 | 296 | 1.040 | 25 | 184 | 223 | 24 | 155 | 34 | 120 | 50, 55, 60 |
Hub version 3: locking-assembly | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | X (mm) | W (mm) | K (mm) | ∅P (mm) | standard bore diameters (mm) | |
S 1325 | 1.320 | 2.580 | 1.400 | 129 | 18 | 68 | 1 | 0,5 | 296 | 1.010 | 24,5 | 184 | 223 | 24 | 155 | 34 | 120 | 50, 55, 60 |
S 1520 | 1.520 | 2.965 | 1.100 | 180 | 25 | 95 | 1 | 0,5 | 340 | 1.490 | 29 | 204 | 235 | 30 | 155 | 40 | 155 | 60, 65, 70 |
S 1525 | 1.520 | 2.965 | 1.300 | 129 | 18 | 68 | 1 | 0,5 | 340 | 1.630 | 32 | 204 | 235 | 30 | 155 | 40 | 155 | 60, 65, 70 |
S 2160 | 2.160 | 4.220 | 1.000 | 219 | 30 | 115 | 2 | 0,3 | 484 | 1.825 | 35 | 200 | 264 | 24 | 196 | 34 | 120 | 50, 55, 60 |
S 2165 | 2.160 | 4.220 | 1.200 | 162 | 22 | 85 | 2 | 0,3 | 484 | 1.725 | 34 | 200 | 264 | 24 | 196 | 34 | 120 | 50, 55, 60 |
S 2870 | 2.875 | 5.625 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 645 | 4.400 | 55 | 250 | 284 | 31 | 196 | 44 | 170 | 70, 75, 80 |
S 2875 | 2.875 | 5.625 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 645 | 4.250 | 54 | 250 | 284 | 31 | 196 | 44 | 170 | 70, 75, 80 |
Order Example 1: S 210.33 ∅30 ∅40 Order Example 2: S 445.33 ∅32 ∅40
S 445 | 33 | ∅32 ∅40 |
---|---|---|
Type Schmidt-Kupplung® Standard S 445 | both sides locking-assembly | bore diameters |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator of the column Schmidt-Kupplung® or please use our selection procedure and legend area to download the required information.
Hub version 5: flange-mounting | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | H (mm) | L (mm) | ∅d (mm) | ∅F (mm) | Skg | |
S 35 | 35 | 65 | 3.100 | 45 | 6 | 23 | 1 | 0,8 | 7 | 1,5 | 0,4 | 52 | 8 | 44 | 22 | 35 | 3xM6 |
S 40 | 45 | 85 | 1.900 | 95 | 13 | 50 | 1 | 0,8 | 10 | 3,1 | 0,6 | 62 | 8 | 44 | 25 | 45 | 3xM6 |
S 45 | 45 | 85 | 2.800 | 45 | 6 | 23 | 1 | 0,8 | 10 | 2,8 | 0,5 | 62 | 8 | 44 | 25 | 45 | 3xM6 |
S 115 | 110 | 210 | 3.500 | 64 | 9 | 34 | 1 | 0,8 | 24 | 7,5 | 1,1 | 74 | 12,5 | 74 | 25 | 48 | 3xM8 |
S 150 | 150 | 290 | 2.200 | 126 | 17 | 66 | 1 | 0,8 | 33 | 24 | 1,9 | 94 | 12,5 | 74 | 45 | 70 | 3xM8 |
S 155 | 150 | 290 | 3.100 | 64 | 9 | 34 | 1 | 0,8 | 33 | 21,5 | 1,7 | 94 | 12,5 | 74 | 45 | 70 | 3xM8 |
S 210 | 210 | 410 | 1.900 | 126 | 17 | 66 | 1 | 0,8 | 47 | 61 | 2,9 | 124 | 12,5 | 74 | 50 | 100 | 5xM8 |
S 215 | 210 | 410 | 2.700 | 64 | 9 | 34 | 1 | 0,8 | 47 | 60 | 2,8 | 124 | 12,5 | 74 | 50 | 100 | 3xM8 |
S 285 | 280 | 550 | 2.500 | 100 | 14 | 53 | 1 | 0,5 | 63 | 52 | 3,6 | 100 | 17 | 101 | 40 | 70 | 3xM12 |
S 360 | 360 | 710 | 1.800 | 162 | 22 | 85 | 1 | 0,5 | 81 | 107 | 5,1 | 120 | 17 | 101 | 50 | 90 | 3xM12 |
S 365 | 360 | 710 | 2.300 | 100 | 14 | 53 | 1 | 0,5 | 81 | 95 | 4,5 | 120 | 17 | 101 | 50 | 90 | 3xM12 |
S 440 | 440 | 0.865 | 1.700 | 162 | 22 | 85 | 1 | 0,5 | 99 | 175 | 6,3 | 140 | 17 | 101 | 50 | 110 | 3xM12 |
S 445 | 440 | 0.865 | 2.100 | 100 | 14 | 53 | 1 | 0,5 | 99 | 160 | 5,8 | 140 | 17 | 101 | 50 | 110 | 3xM12 |
S 630 | 630 | 1.240 | 1.500 | 162 | 22 | 85 | 1 | 0,5 | 142 | 285 | 10 | 143 | 26 | 134 | 55 | 100 | 3xM16 |
S 635 | 630 | 1.240 | 1.700 | 122 | 17 | 64 | 1 | 0,5 | 142 | 275 | 9,8 | 143 | 26 | 134 | 55 | 100 | 3xM10 |
S 760 | 760 | 1.485 | 1.400 | 162 | 22 | 85 | 1 | 0,5 | 170 | 460 | 12,5 | 163 | 26 | 134 | 60 | 120 | 3xM16 |
S 765 | 760 | 1.485 | 1.600 | 122 | 17 | 64 | 1 | 0,5 | 170 | 450 | 12,4 | 163 | 26 | 134 | 60 | 120 | 3xM16 |
S 950 | 950 | 1.820 | 1.300 | 162 | 22 | 85 | 1 | 0,5 | 209 | 865 | 17 | 190 | 26 | 134 | 70 | 150 | 3xM16 |
S 955 | 950 | 1.820 | 1.500 | 122 | 17 | 64 | 1 | 0,5 | 209 | 855 | 16,5 | 190 | 26 | 134 | 70 | 150 | 3xM16 |
S 1130 | 1.130 | 2.200 | 1.200 | 180 | 25 | 95 | 1 | 0,5 | 252 | 585 | 16 | 164 | 31 | 155 | 60 | 115 | 6xM16 |
S 1135 | 1.130 | 2.200 | 1.500 | 129 | 18 | 68 | 1 | 0,5 | 252 | 550 | 15 | 164 | 31 | 155 | 60 | 115 | 6xM16 |
Hub version 5: flange-mounting | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | H (mm) | L (mm) | ∅d (mm) | ∅F (mm) | Skg | |
S 1320 | 1.320 | 2.580 | 1.200 | 180 | 25 | 95 | 1 | 0,5 | 296 | 885 | 19 | 184 | 31 | 155 | 70 | 135 | 6xM16 |
S 1325 | 1.320 | 2.580 | 1.400 | 129 | 18 | 68 | 1 | 0,5 | 296 | 850 | 18 | 184 | 31 | 155 | 70 | 135 | 6xM16 |
S 1520 | 1.520 | 2.965 | 1.100 | 180 | 25 | 95 | 1 | 0,5 | 340 | 1.310 | 22,5 | 204 | 31 | 155 | 80 | 155 | 6xM16 |
S 1525 | 1.520 | 2.965 | 1.300 | 129 | 18 | 68 | 1 | 0,5 | 340 | 1.265 | 22 | 204 | 31 | 155 | 80 | 155 | 6xM16 |
S 2160 | 2.160 | 4.220 | 1.000 | 219 | 30 | 115 | 2 | 0,3 | 484 | 1.700 | 30 | 200 | 33 | 196 | 80 | 150 | 6xM20 |
S 2165 | 2.160 | 4.220 | 1.200 | 162 | 22 | 85 | 2 | 0,3 | 484 | 1.500 | 26 | 200 | 33 | 196 | 80 | 150 | 6xM20 |
S 2870 | 2.875 | 5.625 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 645 | 3.500 | 38 | 250 | 33 | 196 | 100 | 200 | 6xM20 |
S 2875 | 2.875 | 5.625 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 645 | 3.400 | 37 | 250 | 33 | 196 | 100 | 200 | 6xM20 |
Order Example 1: S 210.55 Order Example 2: S 445.55
S 445 | 55 |
---|---|
Type Schmidt-Kupplung® Standard S 445 | both sides flange-mounting |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator of the column Schmidt-Kupplung® or please use our selection procedure and legend area to download the required information.
Hub version 6: standard hub | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | K (mm) | L (mm) | ∅P (mm) | ∅d max (mm) | |
S 35 | 35 | 65 | 3.100 | 45 | 6 | 23 | 1 | 0,8 | 7 | 2,2 | 0,6 | 52 | 16 | 60 | 50 | 25 |
S 40 | 45 | 85 | 1.900 | 95 | 13 | 50 | 1 | 0,8 | 10 | 4,2 | 0,8 | 62 | 16 | 60 | 60 | 36 |
S 45 | 45 | 85 | 2.800 | 45 | 6 | 23 | 1 | 0,8 | 10 | 4,4 | 0,9 | 62 | 16 | 60 | 60 | 25 |
S 115 | 110 | 210 | 3.500 | 64 | 9 | 34 | 1 | 0,8 | 24 | 13 | 1,9 | 74 | 22,5 | 94 | 70 | 30 |
S 150 | 150 | 290 | 2.200 | 126 | 17 | 66 | 1 | 0,8 | 33 | 27,3 | 2,4 | 94 | 27,5 | 104 | 56 | 36 |
S 155 | 150 | 290 | 3.100 | 64 | 9 | 34 | 1 | 0,8 | 33 | 25,9 | 2,3 | 94 | 27,5 | 104 | 56 | 36 |
S 210 | 210 | 410 | 1.900 | 126 | 17 | 66 | 1 | 0,8 | 47 | 77,9 | 4,1 | 124 | 27,5 | 104 | 70 | 40 |
S 215 | 210 | 410 | 2.700 | 64 | 9 | 34 | 1 | 0,8 | 47 | 75 | 4 | 124 | 27,5 | 104 | 70 | 40 |
S 285 | 280 | 550 | 2.500 | 100 | 14 | 53 | 1 | 0,5 | 63 | 54 | 4,2 | 100 | 38 | 143 | 53 | 36 |
S 360 | 360 | 710 | 1.800 | 162 | 22 | 85 | 1 | 0,5 | 81 | 115 | 6 | 120 | 38 | 143 | 70 | 45 |
S 365 | 360 | 710 | 2.300 | 100 | 14 | 53 | 1 | 0,5 | 81 | 109 | 5,7 | 120 | 38 | 143 | 70 | 45 |
S 440 | 440 | 865 | 1.700 | 162 | 22 | 85 | 1 | 0,5 | 99 | 205 | 8,4 | 140 | 38 | 143 | 80 | 50 |
S 445 | 440 | 865 | 2.100 | 100 | 14 | 53 | 1 | 0,5 | 99 | 194 | 7,5 | 140 | 38 | 143 | 80 | 50 |
S 630 | 630 | 1.240 | 1.500 | 162 | 22 | 85 | 1 | 0,5 | 142 | 295 | 11,5 | 143 | 40 | 162 | 77 | 50 |
S 635 | 630 | 1.240 | 1.700 | 122 | 17 | 64 | 1 | 0,5 | 142 | 290 | 10 | 143 | 40 | 162 | 77 | 50 |
S 760 | 760 | 1.485 | 1.400 | 162 | 22 | 85 | 1 | 0,5 | 170 | 475 | 14 | 163 | 44 | 170 | 90 | 60 |
S 765 | 760 | 1.485 | 1.600 | 122 | 17 | 64 | 1 | 0,5 | 170 | 465 | 13,5 | 163 | 44 | 170 | 90 | 60 |
S 950 | 950 | 1.820 | 1.300 | 162 | 22 | 85 | 1 | 0,5 | 209 | 970 | 20 | 190 | 55 | 792 | 110 | 70 |
S 955 | 950 | 1.820 | 1.500 | 122 | 17 | 64 | 1 | 0,5 | 209 | 955 | 20 | 190 | 55 | 192 | 110 | 70 |
S 1130 | 1.130 | 2.200 | 1.200 | 180 | 25 | 95 | 1 | 0,5 | 252 | 590 | 17,5 | 164 | 46 | 185 | 80 | 50 |
S 1135 | 1.130 | 2.200 | 1.500 | 129 | 18 | 68 | 1 | 0,5 | 252 | 570 | 17 | 164 | 46 | 185 | 80 | 50 |
S 1320 | 1.320 | 2.580 | 1.200 | 180 | 25 | 95 | 1 | 0,5 | 296 | 950 | 21,5 | 184 | 51 | 195 | 90 | 60 |
Hub version 6: standard hub | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | K (mm) | L (mm) | ∅P (mm) | ∅d max (mm) | |
S 1325 | 1.320 | 2.580 | 1.400 | 129 | 18 | 68 | 1 | 0,5 | 296 | 0.920 | 21 | 184 | 51 | 195 | 90 | 60 |
S 1520 | 1.520 | 2.965 | 1.100 | 180 | 25 | 95 | 1 | 0,5 | 340 | 1.440 | 27 | 204 | 61 | 215 | 110 | 70 |
S 1525 | 1.520 | 2.965 | 1.300 | 129 | 18 | 68 | 1 | 0,5 | 340 | 1.400 | 26 | 204 | 61 | 215 | 110 | 70 |
S 2160 | 2.160 | 4.220 | 1.000 | 219 | 30 | 115 | 2 | 0,3 | 484 | 1.750 | 32 | 200 | 53 | 236 | 110 | 70 |
S 2165 | 2.160 | 4.220 | 1.200 | 162 | 22 | 85 | 2 | 0,3 | 484 | 1.675 | 31 | 200 | 53 | 236 | 110 | 70 |
S 2870 | 2.875 | 5.625 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 645 | 3.950 | 46 | 250 | 68 | 266 | 120 | 80 |
S 2875 | 2.875 | 5.625 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 645 | 3.800 | 45 | 250 | 68 | 266 | 120 | 80 |
Order Example 1: S 210.66 ∅35 ∅35 Order Example 2: S 445.66 ∅45 ∅45
S 445 | 66 | ∅45 ∅45 |
---|---|---|
Type Schmidt-Kupplung® Standard S 445 | both sides standard hub | bore diameters |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator of the column Schmidt-Kupplung® or please use our selection procedure and legend area to download the required information.
Hub version 3: locking-assembly | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | X (mm) | W (mm) | K (mm) | ∅P (mm) | standard bore diameters (mm) | |
P 45 | 45 | 90 | 3.100 | 45 | 6 | 23 | 1 | 0,5 | 10 | 2,7 | 0,8 | 52 | 74 | 9 | 44 | 15 | 47 | 15, 16 |
P 60 | 60 | 115 | 2.800 | 45 | 6 | 23 | 1 | 0,5 | 13 | 4,2 | 1,0 | 62 | 74 | 9 | 44 | 15 | 47 | 15, 16 |
P 110 | 110 | 210 | 1.600 | 95 | 13 | 50 | 1 | 0,5 | 24 | 29,2 | 1,6 | 84 | 82 | 10 | 44 | 19 | 50 | 24, 25 |
P 115 | 110 | 210 | 2.400 | 45 | 6 | 23 | 1 | 0,5 | 24 | 28,9 | 1,5 | 84 | 82 | 10 | 44 | 19 | 50 | 24, 25 |
P 200 | 200 | 385 | 3.100 | 64 | 9 | 34 | 1 | 0,5 | 44 | 36,7 | 3,5 | 94 | 116 | 15 | 74 | 21 | 76 | 25, 28, 30 |
P 250 | 250 | 490 | 3.100 | 64 | 9 | 34 | 1 | 0,5 | 56 | 33,9 | 3,3 | 95 | 112 | 17 | 74 | 19 | 66 | 24, 25 |
P 280 | 280 | 550 | 1.900 | 126 | 17 | 66 | 1 | 0,5 | 63 | 110,2 | 6,1 | 124 | 124 | 17 | 74 | 25 | 96 | 30, 32, 35, 40 |
P 285 | 280 | 550 | 2.700 | 64 | 9 | 34 | 1 | 0,5 | 63 | 106,4 | 5,9 | 124 | 124 | 17 | 74 | 25 | 96 | 30, 32, 35, 40 |
P 350 | 350 | 690 | 1.900 | 126 | 17 | 66 | 1 | 0,5 | 79 | 115,8 | 6,3 | 124 | 124 | 17 | 74 | 25 | 96 | 30, 32, 35, 40 |
P 355 | 350 | 690 | 2.700 | 64 | 9 | 34 | 1 | 0,5 | 79 | 110,9 | 6,1 | 124 | 124 | 17 | 74 | 25 | 96 | 30, 32, 35, 40 |
P 590 | 590 | 1.155 | 1.700 | 162 | 22 | 85 | 1 | 0,5 | 132 | 239 | 9,8 | 140 | 151 | 17 | 101 | 25 | 96 | 35, 40 |
P 595 | 590 | 1.155 | 2.100 | 100 | 14 | 53 | 1 | 0,5 | 132 | 227 | 9,5 | 140 | 151 | 17 | 101 | 25 | 96 | 35, 40 |
P 700 | 700 | 1.365 | 1.600 | 162 | 22 | 85 | 1 | 0,5 | 156 | 415 | 13,2 | 160 | 161 | 23 | 101 | 30 | 115 | 42, 45, 50 |
P 705 | 700 | 1.365 | 2.000 | 100 | 14 | 53 | 1 | 0,5 | 156 | 399 | 12,8 | 160 | 161 | 23 | 101 | 30 | 115 | 42, 45, 50 |
P 1010 | 1.010 | 1.980 | 1.400 | 162 | 22 | 85 | 1 | 0,5 | 227 | 570 | 18 | 164 | 194 | 23 | 134 | 30 | 112 | 42, 45, 50 |
P 1015 | 1.010 | 1.980 | 1.600 | 122 | 17 | 64 | 1 | 0,5 | 227 | 560 | 17,5 | 164 | 194 | 23 | 134 | 30 | 112 | 42, 45, 50 |
P 1580 | 1.580 | 3.095 | 1.300 | 162 | 22 | 85 | 1 | 0,5 | 355 | 1.120 | 24,5 | 193 | 202 | 24 | 134 | 34 | 120 | 55, 60 |
P 1585 | 1.580 | 3.095 | 1.500 | 122 | 17 | 64 | 1 | 0,5 | 355 | 1.100 | 24 | 193 | 202 | 24 | 134 | 34 | 120 | 55, 60 |
P 2880 | 2.880 | 5.620 | 1.200 | 162 | 22 | 85 | 2 | 0,3 | 644 | 2.050 | 40 | 200 | 276 | 30 | 196 | 40 | 155 | 60, 70 |
P 3830 | 3.830 | 7.500 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 860 | 4.700 | 58 | 250 | 276 | 30 | 196 | 40 | 155 | 60, 70 |
P 3835 | 3.830 | 7.500 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 860 | 4.250 | 53 | 250 | 276 | 30 | 196 | 40 | 155 | 60, 70 |
Hub version 3: locking-assembly | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | X (mm) | W (mm) | K (mm) | ∅P (mm) | standard bore diameters (mm) | |
P 4800 | 4.8 | 9.38 | 900 | 219 | 30 | 115 | 2 | 0,3 | 1.075 | 5 | 61 | 250 | 284 | 31 | 196 | 44 | 170 | 70, 75, 80 |
P 4805 | 4.8 | 9.38 | 1 | 162 | 22 | 85 | 2 | 0,3 | 1.075 | 4.5 | 55 | 250 | 284 | 31 | 196 | 44 | 170 | 70, 75, 80 |
P 6610 | 6.61 | 12.94 | 800 | 219 | 30 | 115 | 2 | 0,2 | 1.483 | 7.575 | 73 | 280 | 296 | 30 | 196 | 50 | 185 | 85, 90 |
P 6615 | 6.61 | 12.94 | 1 | 162 | 22 | 85 | 2 | 0,2 | 1.483 | 7.5 | 73 | 280 | 296 | 30 | 196 | 50 | 185 | 85, 90 |
Order Example 1: P 350.33 ∅30 ∅40 Order Example 2: P 595.33 ∅35 ∅40
P 595 | 33 | ∅35 ∅40 |
---|---|---|
Type Schmidt-Kupplung® Power Plus P 595 | both sides locking-assembly | bore diameters |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator of the column Schmidt-Kupplung® or please use our selection procedure and legend area to download the required information.
Hub version 5: flange-mounting | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | H (mm) | L (mm) | ∅d (mm) | ∅F (mm) | Skg | |
P 45 | 45 | 90 | 3.100 | 45 | 6 | 23 | 1 | 0,5 | 10 | 1,8 | 0,4 | 52 | 8 | 44 | 22 | 35 | 4xM6 |
P 60 | 60 | 115 | 2.800 | 45 | 6 | 23 | 1 | 0,5 | 13 | 3,1 | 0,6 | 62 | 8 | 44 | 25 | 45 | 4xM6 |
P 110 | 110 | 210 | 1.600 | 95 | 13 | 50 | 1 | 0,5 | 24 | 9,1 | 1,3 | 84 | 8 | 44 | 40 | 67 | 5xM6 |
P 115 | 110 | 210 | 2.400 | 45 | 6 | 23 | 1 | 0,5 | 24 | 8,8 | 0,9 | 84 | 8 | 44 | 40 | 67 | 5xM6 |
P 200 | 200 | 385 | 3.100 | 64 | 9 | 34 | 1 | 0,5 | 44 | 23 | 1,8 | 94 | 12,5 | 74 | 45 | 70 | 4xM8 |
P 250 | 250 | 490 | 3.100 | 64 | 9 | 34 | 1 | 0,5 | 56 | 25 | 2 | 95 | 12,5 | 74 | 45 | 71 | 5xM8 |
P 280 | 280 | 550 | 1.900 | 126 | 17 | 66 | 1 | 0,5 | 63 | 63 | 3 | 124 | 12,5 | 74 | 50 | 98 | 4xM8 |
P 285 | 280 | 550 | 2.700 | 64 | 9 | 34 | 1 | 0,5 | 63 | 61 | 2,9 | 124 | 12,5 | 74 | 50 | 98 | 4xM8 |
P 350 | 350 | 690 | 1.900 | 126 | 17 | 66 | 1 | 0,5 | 79 | 65 | 3,2 | 124 | 12,5 | 74 | 50 | 100 | 5xM8 |
P 355 | 350 | 690 | 2.700 | 64 | 9 | 34 | 1 | 0,5 | 79 | 63 | 3 | 124 | 12,5 | 74 | 50 | 100 | 5xM8 |
P 480 | 480 | 945 | 2.300 | 100 | 14 | 53 | 1 | 0,5 | 108 | 105 | 5 | 120 | 17 | 101 | 50 | 90 | 4xM12 |
P 590 | 590 | 1.155 | 1.700 | 162 | 22 | 85 | 1 | 0,5 | 132 | 187 | 6,8 | 140 | 17 | 101 | 50 | 110 | 4xM12 |
P 595 | 590 | 1.155 | 2.100 | 100 | 14 | 53 | 1 | 0,5 | 132 | 175 | 6,3 | 140 | 17 | 101 | 50 | 110 | 4xM12 |
P 700 | 700 | 1.365 | 1.600 | 162 | 22 | 85 | 1 | 0,5 | 156 | 304 | 8 | 160 | 17 | 101 | 60 | 130 | 4xM12 |
P 705 | 700 | 1.365 | 2.000 | 100 | 14 | 53 | 1 | 0,5 | 156 | 295 | 7,4 | 160 | 17 | 101 | 60 | 130 | 4xM12 |
P 1010 | 1.010 | 1.980 | 1.400 | 162 | 22 | 85 | 1 | 0,5 | 227 | 480 | 13,2 | 164 | 26 | 134 | 60 | 120 | 4xM16 |
P 1015 | 1.010 | 1.980 | 1.600 | 122 | 17 | 64 | 1 | 0,5 | 227 | 475 | 13 | 164 | 26 | 134 | 60 | 120 | 4xM12 |
P 1580 | 1.580 | 3.095 | 1.300 | 162 | 22 | 85 | 1 | 0,5 | 355 | 920 | 18 | 193 | 26 | 134 | 70 | 150 | 5xM16 |
P 1585 | 1.580 | 3.095 | 1.500 | 122 | 17 | 64 | 1 | 0,5 | 355 | 910 | 17,5 | 193 | 26 | 134 | 70 | 150 | 5xM16 |
P 2880 | 2.880 | 5.620 | 1.200 | 162 | 22 | 85 | 2 | 0,3 | 644 | 1.600 | 28 | 200 | 33 | 196 | 80 | 150 | 4xM20 |
P 3830 | 3.830 | 7.500 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 860 | 3.750 | 41 | 250 | 33 | 196 | 100 | 200 | 8xM20 |
Hub version 5: flange-mounting | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | H (mm) | L (mm) | ∅d (mm) | ∅F (mm) | Skg | |
P 3835 | 3.830 | 7.500 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 0.860 | 3.700 | 41 | 250 | 33 | 196 | 100 | 200 | 8xM20 |
P 4800 | 4.800 | 9.380 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 1.075 | 4.080 | 45 | 250 | 33 | 196 | 100 | 200 | 10xM20 |
P 4805 | 4.800 | 9.380 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 1.075 | 4.000 | 43 | 250 | 33 | 196 | 100 | 200 | 10xM20 |
P 6610 | 6.610 | 12.94 | 0.800 | 219 | 30 | 115 | 2 | 0,2 | 1.483 | 8.700 | 52 | 280 | 33 | 196 | 150 | 230 | 12xM20 |
P 6615 | 6.610 | 12.94 | 1.000 | 162 | 22 | 85 | 2 | 0,2 | 1.483 | 5.600 | 43 | 280 | 33 | 196 | 150 | 230 | 12xM20 |
Order Example 1: P 350.55 Order Example 2: P 595.55
P 595 | 55 |
---|---|
Type Schmidt-Kupplung® Power Plus P 595 | both sides flange-mounting |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator of the column Schmidt-Kupplung® or please use our selection procedure and legend area to download the required information.
Hub version 6: standard hub | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | ∅P (mm) | K (mm) | ∅dmax (mm) | |
P 45 | 45 | 90 | 3.100 | 45 | 6 | 23 | 1 | 0,5 | 10 | 2,3 | 0,6 | 52 | 60 | 50 | 16 | 25 |
P 60 | 60 | 115 | 2.800 | 45 | 6 | 23 | 1 | 0,5 | 13 | 4,3 | 0,8 | 62 | 60 | 60 | 16 | 36 |
P 110 | 110 | 210 | 1.600 | 95 | 13 | 50 | 1 | 0,5 | 24 | 12,3 | 1,6 | 84 | 78 | 50 | 25 | 30 |
P 115 | 110 | 210 | 2.400 | 45 | 6 | 23 | 1 | 0,5 | 24 | 11,7 | 1,4 | 84 | 78 | 50 | 25 | 30 |
P 200 | 200 | 385 | 3.100 | 64 | 9 | 34 | 1 | 0,5 | 44 | 31,5 | 3,2 | 94 | 104 | 56 | 27,5 | 36 |
P 250 | 250 | 490 | 3.100 | 64 | 9 | 34 | 1 | 0,5 | 56 | 29,9 | 2,6 | 95 | 104 | 56 | 27,5 | 36 |
P 280 | 280 | 550 | 1.900 | 126 | 17 | 66 | 1 | 0,5 | 63 | 82,6 | 4,3 | 124 | 104 | 70 | 27,5 | 40 |
P 285 | 280 | 550 | 2.700 | 64 | 9 | 34 | 1 | 0,5 | 63 | 78,8 | 4,1 | 124 | 104 | 70 | 27,5 | 40 |
P 350 | 350 | 690 | 1.900 | 126 | 17 | 66 | 1 | 0,5 | 79 | 88,2 | 4,5 | 124 | 104 | 70 | 27,5 | 40 |
P 355 | 350 | 690 | 2.700 | 64 | 9 | 34 | 1 | 0,5 | 79 | 83,3 | 4,3 | 124 | 104 | 70 | 27,5 | 40 |
P 480 | 480 | 945 | 2.300 | 100 | 14 | 53 | 1 | 0,5 | 108 | 117 | 6,1 | 120 | 143 | 70 | 38 | 45 |
P 590 | 590 | 1.155 | 1.700 | 162 | 22 | 85 | 1 | 0,5 | 132 | 217 | 8,3 | 140 | 143 | 80 | 38 | 50 |
P 595 | 590 | 1.155 | 2.100 | 100 | 14 | 53 | 1 | 0,5 | 132 | 205 | 7,9 | 140 | 143 | 80 | 38 | 50 |
P 700 | 700 | 1,4 | 1.600 | 162 | 22 | 85 | 1 | 0,5 | 156 | 348 | 10,2 | 160 | 151 | 80 | 42 | 50 |
P 705 | 700 | 1.365 | 2.000 | 100 | 14 | 53 | 1 | 0,5 | 156 | 331 | 9,9 | 160 | 143 | 80 | 38 | 50 |
P 1010 | 1.010 | 1.980 | 1.400 | 162 | 22 | 85 | 1 | 0,5 | 227 | 505 | 14,5 | 164 | 170 | 90 | 44 | 60 |
P 1015 | 1.010 | 1.980 | 1.600 | 122 | 17 | 64 | 1 | 0,5 | 227 | 495 | 14 | 164 | 170 | 90 | 44 | 60 |
P 1580 | 1.580 | 3.095 | 1.300 | 162 | 22 | 85 | 1 | 0,5 | 355 | 1.065 | 22 | 193 | 192 | 110 | 55 | 70 |
P 1585 | 1.580 | 3.095 | 1.500 | 122 | 17 | 64 | 1 | 0,5 | 355 | 1.045 | 21,5 | 193 | 192 | 110 | 55 | 70 |
P 2880 | 2.880 | 5.620 | 1.200 | 162 | 22 | 85 | 2 | 0,3 | 644 | 1.800 | 33 | 200 | 236 | 110 | 53 | 70 |
P 3830 | 3.830 | 7.500 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 860 | 4.250 | 49 | 250 | 266 | 120 | 68 | 80 |
P 3835 | 3.830 | 7.500 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 860 | 4.050 | 47 | 250 | 266 | 120 | 68 | 80 |
Hub version 6: standard hub | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | ∅P (mm) | K (mm) | ∅dmax (mm) | |
P 4800 | 4.800 | 9.380 | 0.900 | 219 | 30 | 115 | 2 | 0,3 | 1.075 | 4.550 | 52 | 250 | 276 | 120 | 73 | 80 |
P 4805 | 4.800 | 9.380 | 1.000 | 162 | 22 | 85 | 2 | 0,3 | 1.075 | 4.325 | 50 | 250 | 276 | 120 | 73 | 80 |
P 6610 | 6.610 | 12.940 | 0.800 | 219 | 30 | 115 | 2 | 0,2 | 1.483 | 7.425 | 70 | 280 | 322 | 150 | 96 | 95 |
P 6615 | 6.610 | 12.940 | 1.000 | 162 | 22 | 85 | 2 | 0,2 | 1.483 | 7.025 | 67 | 280 | 322 | 150 | 96 | 95 |
Order Example 1: P 350.66 ∅35 ∅35 Order Example 2: P 595.66 ∅45 ∅45
P 595 | 66 | ∅45 ∅45 |
---|---|---|
Type Schmidt-Kupplung® Power Plus P 595 | both sides standard hub | bore diameters |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator of the column Schmidt-Kupplung® or please use our selection procedure and legend area to download the required information.
Hub version 3: locking-assembly | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | X (mm) | W (mm) | K (mm) | ∅P (mm) | standard bore diameters (mm) | |
V 65 | 65 | 126 | 1.300 | 151 | 21 | 79 | 1 | 0,5 | 14 | 30,2 | 1,7 | 84 | 82 | 11 | 44 | 19 | 50 | 24, 25 |
V 210 | 210 | 410 | 1.500 | 216 | 30 | 114 | 1 | 0,5 | 47 | 92 | 5,2 | 124 | 116 | 15 | 74 | 21 | 76 | 25, 28, 30 |
V 290 | 290 | 620 | 1.000 | 360 | 50 | 190 | 1 | 0,5 | 71 | 570,8 | 12,6 | 170 | 124 | 17 | 74 | 25 | 96 | 30, 32, 35, 40 |
V 440 | 440 | 865 | 1.500 | 216 | 30 | 114 | 1 | 0,5 | 99 | 237 | 9,8 | 140 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
V 680 | 680 | 1.340 | 0.900 | 396 | 55 | 209 | 1 | 0,3 | 154 | 1.11 | 20 | 200 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
V 700 | 700 | 1.365 | 1.400 | 216 | 30 | 114 | 1 | 0,5 | 156 | 391 | 12,2 | 160 | 151 | 17 | 101 | 25 | 96 | 30, 32, 35, 40 |
V 760 | 760 | 1.485 | 1.200 | 216 | 30 | 114 | 1 | 0,5 | 170 | 550 | 17,5 | 163 | 194 | 23 | 134 | 30 | 115 | 42, 45, 50 |
V 950 | 950 | 1.820 | 1.000 | 270 | 37 | 142 | 1 | 0,5 | 209 | 945 | 21,5 | 190 | 194 | 23 | 134 | 30 | 115 | 42, 45, 50 |
V 955 | 950 | 1.820 | 1.100 | 216 | 30 | 114 | 1 | 0,5 | 209 | 1.015 | 22,5 | 190 | 194 | 23 | 134 | 30 | 115 | 42, 45, 50 |
V 1200 | 1.200 | 2.350 | 0.700 | 432 | 60 | 228 | 1 | 0,3 | 269 | 2.240 | 32,5 | 230 | 194 | 23 | 134 | 30 | 115 | 42, 45, 50 |
V 1320 | 1.320 | 2.580 | 1.000 | 234 | 32 | 123 | 1 | 0,5 | 296 | 1.080 | 26 | 184 | 223 | 24 | 155 | 34 | 120 | 50, 55, 60 |
V 1520 | 1.520 | 2.965 | 0.800 | 320 | 44 | 169 | 1 | 0,5 | 340 | 1.610 | 31 | 204 | 223 | 24 | 155 | 34 | 120 | 50, 55, 60 |
V 1525 | 1.520 | 2.965 | 1.000 | 234 | 32 | 123 | 1 | 0,5 | 340 | 1.540 | 30 | 204 | 223 | 24 | 155 | 34 | 120 | 50, 55, 60 |
V 2100 | 2.100 | 4.110 | 0.600 | 504 | 70 | 266 | 1 | 0,3 | 471 | 3.910 | 53 | 264 | 235 | 30 | 155 | 40 | 155 | 60, 65, 70 |
V 2160 | 2.160 | 4.220 | 0.900 | 270 | 37 | 142 | 2 | 0,3 | 484 | 2.075 | 40 | 200 | 276 | 30 | 196 | 40 | 155 | 60, 65, 70 |
V 2875 | 2.875 | 5.625 | 0.800 | 270 | 37 | 142 | 2 | 0,3 | 645 | 4.525 | 56 | 250 | 284 | 31 | 196 | 44 | 170 | 70, 75, 80 |
V 3300 | 3.300 | 6.470 | 0.500 | 522 | 72 | 275 | 2 | 0,2 | 742 | 7.550 | 74 | 280 | 284 | 31 | 196 | 44 | 170 | 70, 75, 80 |
V 3840 | 3.830 | 7.500 | 0.800 | 270 | 37 | 142 | 2 | 0,3 | 860 | 4.450 | 53 | 250 | 276 | 30 | 196 | 40 | 155 | 60, 65, 70 |
Order Example 1: V 290.33 ∅30 ∅40 Order Example 2: V 440.33 ∅32 ∅40
V 440 | 33 | ∅32 ∅40 |
---|---|---|
Type Schmidt-Kupplung® Offset Plus V 440 | both sides locking-assembly | bore diameters |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator
of the column Schmidt-Kupplung® or please use our selection procedure and legend
area to download the required information.
Hub version 5: flange-mounting | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | H (mm) | L (mm) | ∅d (mm) | ∅F (mm) | Skg | |
V 65 | 65 | 126 | 1.300 | 151 | 21 | 79 | 1 | 0,5 | 14 | 8,9 | 1,1 | 84 | 8 | 48 | 40 | 67 | 3xM6 |
V 210 | 210 | 410 | 1.500 | 216 | 30 | 114 | 1 | 0,5 | 47 | 78 | 3,7 | 124 | 12,5 | 74 | 50 | 98 | 3xM8 |
V 290 | 290 | 620 | 1.000 | 360 | 50 | 190 | 1 | 0,5 | 71 | 285 | 7 | 170 | 12,5 | 74 | 60 | 148 | 3xM8 |
V 440 | 440 | 865 | 1.500 | 216 | 30 | 114 | 1 | 0,5 | 99 | 187 | 6,8 | 140 | 17 | 101 | 50 | 110 | 3xM12 |
V 680 | 680 | 1.340 | 0.900 | 396 | 55 | 209 | 1 | 0,3 | 154 | 790 | 13 | 200 | 17 | 101 | 80 | 170 | 3xM12 |
V 700 | 700 | 1.365 | 1.400 | 216 | 30 | 114 | 1 | 0,5 | 156 | 313 | 8,6 | 160 | 17 | 101 | 60 | 130 | 4xM12 |
V 760 | 760 | 1.485 | 1.200 | 216 | 30 | 114 | 1 | 0,5 | 170 | 465 | 12,7 | 163 | 26 | 134 | 60 | 120 | 3xM16 |
V 950 | 950 | 1.820 | 1.000 | 270 | 37 | 142 | 1 | 0,5 | 209 | 930 | 18 | 190 | 26 | 134 | 70 | 150 | 3xM16 |
V 955 | 950 | 1.820 | 1.100 | 216 | 30 | 114 | 1 | 0,5 | 209 | 875 | 17 | 190 | 26 | 134 | 70 | 150 | 3xM16 |
V 1200 | 1.200 | 2.350 | 0.700 | 432 | 60 | 228 | 1 | 0,3 | 269 | 2.040 | 26 | 230 | 26 | 134 | 100 | 190 | 3xM16 |
V 1320 | 1.320 | 2.580 | 1.000 | 234 | 32 | 123 | 1 | 0,5 | 296 | 910 | 20 | 184 | 31 | 155 | 70 | 135 | 6xM16 |
V 1520 | 1.520 | 2.965 | 0.800 | 320 | 44 | 169 | 1 | 0,5 | 340 | 1.540 | 26 | 204 | 31 | 155 | 80 | 130 | 6xM16 |
V 1525 | 1.520 | 2.965 | 1.000 | 234 | 32 | 123 | 1 | 0,5 | 340 | 1.355 | 23 | 204 | 31 | 155 | 80 | 155 | 6xM16 |
V 2100 | 2.100 | 4.110 | 0.600 | 504 | 70 | 266 | 1 | 0,3 | 471 | 4.070 | 44 | 264 | 31 | 155 | 80 | 130 | 6xM16 |
V 2160 | 2.160 | 4.220 | 0.900 | 270 | 37 | 142 | 2 | 0,3 | 484 | 1.850 | 32 | 200 | 33 | 196 | 80 | 150 | 6xM20 |
V 2875 | 2.875 | 5.625 | 0.800 | 270 | 37 | 142 | 2 | 0,3 | 645 | 3.650 | 40 | 250 | 33 | 196 | 100 | 200 | 6xM20 |
V 3300 | 3.300 | 6.470 | 0.500 | 522 | 72 | 275 | 2 | 0,2 | 742 | 6.800 | 59 | 280 | 33 | 196 | 100 | 230 | 6xM20 |
V 3840 | 3.830 | 7.500 | 0.800 | 270 | 37 | 142 | 2 | 0,3 | 860 | 4.100 | 44 | 250 | 33 | 196 | 100 | 200 | 8xM20 |
Order Example 1: V 210.55 Order Example 2: V 680.55
V 680 | 55 |
---|---|
Type Schmidt-Kupplung® Offset Plus V 680 | both sides flange-mounting |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator
of the column Schmidt-Kupplung® or please use our selection procedure and legend
area to download the required information.
Hub version 6: standard hub | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TKN (Nm) | TK max (Nm) | nmax (1/min) | ΔKv (mm) | ΔKr min (mm) | ΔKr (mm) | ΔKa (mm) | Δ Kw (°) | CT (kNm/rad) | J (kg cm2) | m (kg) | ∅R (mm) | L (mm) | ∅P (mm) | K (mm) | ∅dmax (mm) | |
V 65 | 65 | 126 | 1.300 | 151 | 21 | 79 | 1 | 0,5 | 14 | 12,6 | 1,4 | 84 | 72 | 50 | 20 | 30 |
V 210 | 210 | 410 | 1.500 | 216 | 30 | 114 | 1 | 0,5 | 47 | 86 | 4,4 | 124 | 104 | 70 | 27,5 | 40 |
V 290 | 290 | 620 | 1.000 | 360 | 50 | 190 | 1 | 0,5 | 71 | 339,3 | 9,2 | 170 | 124 | 90 | 37,5 | 50 |
V 440 | 440 | 865 | 1.500 | 216 | 30 | 114 | 1 | 0,5 | 99 | 215 | 8,2 | 140 | 143 | 80 | 38 | 50 |
V 680 | 680 | 1.340 | 0.900 | 396 | 55 | 209 | 1 | 0,3 | 154 | 1.090 | 19 | 200 | 151 | 80 | 42 | 50 |
V 700 | 700 | 1.365 | 1.400 | 216 | 30 | 114 | 1 | 0,5 | 156 | 371 | 10,8 | 160 | 151 | 80 | 42 | 50 |
V 760 | 760 | 1.485 | 1.200 | 216 | 30 | 114 | 1 | 0,5 | 170 | 485 | 14 | 163 | 170 | 90 | 44 | 60 |
V 950 | 950 | 1.820 | 1.000 | 270 | 37 | 142 | 1 | 0,5 | 209 | 985 | 20,5 | 190 | 192 | 110 | 55 | 70 |
V 955 | 950 | 1.820 | 1.100 | 216 | 30 | 114 | 1 | 0,5 | 209 | 915 | 19 | 190 | 192 | 110 | 55 | 70 |
V 1200 | 1.200 | 2.350 | 0.700 | 432 | 60 | 228 | 1 | 0,3 | 269 | 2.235 | 30,5 | 230 | 202 | 120 | 60 | 80 |
V 1320 | 1.320 | 2.580 | 1.000 | 234 | 32 | 123 | 1 | 0,5 | 296 | 990 | 22,5 | 184 | 195 | 90 | 51 | 60 |
V 1520 | 1.520 | 2.965 | 0.800 | 320 | 44 | 169 | 1 | 0,5 | 340 | 1.560 | 29 | 204 | 215 | 110 | 61 | 70 |
V 1525 | 1.520 | 2.965 | 1.000 | 234 | 32 | 123 | 1 | 0,5 | 340 | 1.490 | 27,5 | 204 | 215 | 110 | 61 | 70 |
V 2100 | 2.100 | 4.110 | 0.600 | 504 | 70 | 266 | 1 | 0,3 | 471 | 3.690 | 47 | 264 | 215 | 120 | 61 | 80 |
V 2160 | 2.160 | 4.220 | 0.900 | 270 | 37 | 142 | 2 | 0,3 | 484 | 1.825 | 33 | 200 | 236 | 110 | 53 | 70 |
V 2875 | 2.875 | 5.625 | 0.800 | 270 | 37 | 142 | 2 | 0,3 | 645 | 4.075 | 47 | 250 | 266 | 120 | 68 | 80 |
V 3300 | 3.300 | 6.470 | 0.500 | 522 | 72 | 275 | 2 | 0,2 | 742 | 7.100 | 65 | 280 | 266 | 120 | 68 | 80 |
V 3840 | 3.830 | 7.500 | 0.800 | 270 | 37 | 142 | 2 | 0,3 | 860 | 4.425 | 51 | 250 | 266 | 120 | 68 | 80 |
Order Example 1: V 210.66 ∅35 ∅35 Order Example 2: V 680.66 ∅40 ∅40
P 595 | 66 | ∅40 ∅40 |
---|---|---|
Type Schmidt-Kupplung® Offset Plus V 680 | both sides standard hub | bore diameters |
To ensure the correct selection of the Schmidt-Kupplung® please use the TD Calculator
of the column Schmidt-Kupplung® or please use our selection procedure and legend
area to download the required information.
Table 1: performance factor | ||
---|---|---|
speed range 1/min | service life (h) | performance factor |
0-500 | 5 | 1,8 |
0-500 | 10 | 2,3 |
0-500 | 20 | 2,8 |
500-1.000 | 5 | 2,3 |
500-1.000 | 10 | 2,8 |
500-1.000 | 20 | 3,5 |
1.000-2.000 | 5 | 2,8 |
1.000-2.000 | 10 | 3,6 |
1.000-2.000 | 20 | 4,4 |
2.000-3.000 | 5 | 3,2 |
2.000-3.000 | 10 | 4 |
2.000-3.000 | 20 | 4,8 |
Table 2: service factor | |
---|---|
uniform | 1 |
light shocks | 1,5 |
medium shocks | 2 |
heavy shocks | 2,5 |
Performance | |
---|---|
TKN | continuous torque rating of the coupling (Nm) |
TK max | maximum torque capacity of the coupling (Nm) |
nmax | maximum speed of the coupling (1/min) |
ΔKv | maximum linear range of the coupling (mm) |
ΔKr | maximum radial offset capacity (mm) |
ΔKr min | minimum radial offset capacity (mm) |
ΔKa | maximum axial misalignment capacity (mm) |
Δ Kw | maximum angular misalignment capacity (°) |
CT | torsional stiffness (kNm/rad) |
J | moment of inertia (kg cm2) |
m | weight (kg) |
Dimension | |
---|---|
∅R | swing diameter (mm) |
H | disc thickness (mm) |
L | coupling length (mm) |
X | mounting space (mm) |
W | coupling basis (mm) |
∅P | hub diameter (mm) |
K | total hub length (mm) |
∅d | bore diameter (mm) |
∅F | bolt circle diameter (mm) |
Skg | number of counter bores x bolt size |
"ABSSAC" is a registered trade mark 2375859
All rights are reserved.
The use of this catalogue is made available to you by Abssac Limited. The exclusive right to control the use of the copyright and trademarks on this site is controlled by Abssac Limited. These may not be copied, reproduced, published, distributed, modified or otherwise used in any form including electronic copying without the express permission of Abssac Limited. Abssac Limited has made all reasonable endeavor to ensure that the material on this site is accurate. You agree that Abssac Limited, nor any other person involved in creating or providing this catalogue shall be liable for any indirect or consequential damage arising from the use of any information contained in this catalogue.
The information contained in this catalogue is provided 'as is' without warranty of any kind, either expressed or implied. Abssac Limited assumes no responsibility for errors or omissions in this catalogue or other documents which are reference by or linked to this catalogue. This catalogue could include technical or other inaccuracies including typographical errors. Updates and changes are periodically added to the information herein; these changes will be incorporated in new editions of this catalogue. Abssac Limited may make improvements and/or changes in the product(s) or service(s) described in this publication at any time. You agree that the above terms represent the entire basis of the agreement between us, upon which you are permitted to enter this site and you agree that all relations between us are subject to the Law of England and Wales.